Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 8)

8 Orientation and Height Transfer
This program can be used for the following purposes:
• To determine the orientation at the instrument station.
• To determine the station elevation.
• To determine simultaneously the orientation and the station
elevation.
The orientation and the station elevation are calculated from
measurements to as many as ten known points.
Orientation and Height Transfer is often used when more than one
known point is available around the station. Measurements to
additional known points allow a reliability control of the calculated
orientation and station elevation.
Before starting Orientation and Height Transfer the station must
first be set using one of the following system functions or
programs:
• Station Setup
• Resection, or
• Free Station.
Introduction
Basic procedure