Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 81)

81
Hidden
Point
When configuration is completed.
You must configure the hidden-point rod the first time you use the
program. For continued use, it is only necessary to use
CONFIGURATION when you want to change one of the settings.
F1 F1 F1 F1 F1
CONT
Rod Length Distance from center of end prism to tip of the
hidden point rod.
Dist R1-R2 Spacing between the centers of prisms R1
and R2.
Dist R1-R3 Spacing between the centers of prisms R1
and R3.
Meas. Job Selection of the job for recording
measurements.
Data Job Selection of the job containing the fix point
coordinates.
1
100pr29
R1-R2
R1-R3
rod length
R1
R3
R2