Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 73)

73
Reference
Line
Offset To define a parallel offset of the Reference Line
in relation to the Baseline.
Line /
α
To define a line offset for the starting point of
the Reference Line and an angle between
Reference Line and Baseline.
Ht Offset To define a height offset of the Reference Line
in relation to the reference elevation.
Ref. Elev. To define the reference elevation for the
calculation of the height offset.
☞
In order to change the setting for Ref.
Elev., the parameter Line/
α
must be
turned OFF.
• Ref. Elev. =
1st Base Point The reference elevation is the elevation of the
first Base Point.
• Ref. Elev. =
Baseline The reference elevation is the elevation of the
Baseline at the intersection point with the
vertical through current reflector position.
REFLN\ Ref Line Menu
MC
Configuration Call the configuration in the first application dialog.
SHIFT
F2 F2 F2 F2 F2
CONF
Parameters for the definition of the Reference line:
REFLN\ Configuration
MC
1
100pr24
1st Base Pt.
Baseline
Reference Line
2nd Base Pt.
Line Of
fset
α αα αα
Line /
α :