Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 71)

71
Reference
Line
Advanced Feature:
Constant reference
elevation
Configuration:
Ref. Elev. = 1st Base Point
Ht. Offset = ON
Setting out element:
∆
Ht along the vertical, in
relation to the
Reference elevation
REFLN\ Define Reference Line
1st BasePt : 1
2nd BasePt : 2
Offset : 0.000 m
Line : 0.000 m
Angle α αα αα : 0°00'00''
Ht.Offset : 1.500 m
MC
For the configuration Ref.Elev. = 1st Base Point, the reference
elevation for the calculation of
∆
Height values is the elevation of
the 1st base point.
You can modify the reference elevation by specifiying a height offset
(Ht.Offset) in the dialog for the definition of the reference line.
1
100pr22 1st Base Pt.
Elevation
Ref. Elevation
∆
Ht–
∆
Ht+
Ht Of
fset+