Remote control only, To mark a position, 1 press [shift] + [marker] during play – Panasonic SC-DK2 User Manual
Page 20: 2 press [eisster] at the point you want to mark, To mark another position, Recaliing a marked position, Press [shift] + [marker, 3 press [enter] to recall the position, To clear a marker, To clear the marker display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BZHii . PROGRAM
%
! *
No marker
2 3®+^
CD
Remote control only
This feature allows you to mark up to 5 points on a disc so you can
return to them easily at a later time.
To mark a position
1
Press [SHIFT] + [MARKER] during
play.
The marker display appears.
2
Press [EiSSTER] at the point you want
to mark.
To mark another position
While the marker display is on the screen
(T) Press the cursor buttons [-^l or [►] to select another “ ♦ ”,
® Press [ENTER].
Recaliing a marked position
H
If the marker display is not on the screen
Press [SHIFT] + [MARKER],
The marker display appears.
^ Press the cursor buttons [◄] or
[> ]
to
highlight the required marker.
3 Press [ENTER] to recall the position.
To clear a marker
(3) If the marker display is not on the screen
Press [SHIFT] + [MARKER].
® Press the cursor buttons [-^l or [►] to highlight the marker you
want to clear.
@ Press [CANCEL].
To clear the marker display
Press [SHIFT] + [MARKER].
• This feature cannot be used;
• If the play time for the disc is not displayed.
• During program K page 23) and random play (■» page 24).
• While CD MANAGER page 25) is on.
• Some subtitles may fail to appear around the marker (DVD).
• Markers clear in the following situations:
• The unit is turned off.
• The disc is changed or removed.
• A source other than DVD/CD is selected.
RQT5327