The remote control, Product seh/ice, For a cleaner crisper sound – Panasonic SC-DK2 User Manual

Page 61: Product service, Maintenance product seh/ice

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Playing discs

The display is wrong or play won’t
start.

The disc may be upside down. ©

■ Wipe tíie disc. '.;

Replace the disc if it is scratched, warped, or non-standard.
Condensation may have formed inside the unit due to a sudden change in temperature. Wait about
an hour for it to clearand try again.

“TAKE OUT/DISC” appears on the

display.

There is a probiem with the disc mechanism. (A power failure may have occurred.)
The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc

in the tray, close it. The unit will make the disc changing noises for a few moments and then it

should operate normally.

The picture does not appear on

The region number of the disc doesn’t match the region number of this unit. ®

the TV, when playing DVD.

Connectthevideoconnectioncabie.©,©:;

Set the TV to video input mode.

The picture doss not appear on
the TV, when playing Video CD.

Connect the video connection cable. ®, ®
Set the TV to video input mode.

CD MANAGER, program and
random play cannot be used.

Ensure a Video CD or CD is In the play position tray.

The initial settings menu cannot

be accessed.

Select disc as the source.

Cancel program and random play , or select “NORMAL” with CD MANAGER. ©, ©

You have forgotten your ratings
password.

Reset the unit to its original factory settings by doing the following procedure.
(l) Press IP] on the main unit and [>10] on the remote control at the same time for^out 3 seconds

until the message “Initialized” disappears from the television screen:

C|) Turn the unit off and bn again.

The remote control

The remote control doesn’t work.

Check the batteries are inserted correctly. ®

Replace the batteries if they are worn.

Maintenance

Product Seh/ice

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap-

and-water solution or a weak detergent solution.

*

* Never use alcohol, paint thinner or benzine to clean this unit.

® Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

Do not attempt to remove the cover(s) or repair the unit yourself.

Refer servicing to qualified personnel only.

Product Information

For product service, product information or assistance with product
operation, refer to the servicenter directory.

For a cleaner crisper sound

Clean the heads regularly to assure good quality playback and
recording.

Use a cleaning tape (not included).

i

I

I

OC

RQT5327

Advertising