Panasonic SC-DK2 - Manual (Page 55)

____
ф '■ 'iiSiX ^ ■:-4V> / ■ 'ч' v'" i Й-i
Changes to the initial settings rennain intact after the unit is turned off.
Do the setting procedures again to restore to the original settings.
There is no item 7 or 8.
Setting details
Select the soundtrack language, Some discs are designed to start in a certain language despite any changes you make here.
Input a code number with the numbered buttons when you select “5 Other iff (•* page 59).
Select the subtitle language. Some discs are designed to start in a certain language despite any changes you make here,
input a code number with the numbered buttons when ypu^select “5 Other ^ (■* page 59).
Select the language for the top menu and other menus shown by the disc.
Input a code number with the numbered buttons when you select “4 Other ^ (■► page 59).
Set a ratings level for playing DVDs. The DVDs must have ratings levels recorded on them for this feature to be effective. Discs with this
feature will be marked.
Level 8: All DVDs can be played.
Level 7 to level 1: Prohibits play of DVDs with ratings recorded on them.
Level 0: Prohibits play of all DVDs.
The password screen is shown if you choose levels 7 to 0.
Select the language used for menus and messages the unit displays on the television (including these menus).
Choose whether to show the on-screen messages that appear on the television when you perform operations.
Select the color and position of on-screen messages and GUI.
Select the aspect ratio to suit your television.
4:3; Regular television 16:9: Widescreen television
The optimum when listening to 5.1 channel sound is for all the speakers, except for the subwoofer, to be the same distance from the
listening position.
You can adjust the delay time for the center and surround speakers to make up for differences in distances between the speakers
(• page 59).
These adjustments are effective when playing DVDs encoded with Dolby Digital.
Select a picture type for when the picture is paused.
Field; Less blurred field stills are shown. Select if jittering occurs when “1 Automatic” is selected.
Frame: Sharper frame stills are shown. Select if small text or fine patterns cannot be seen clearly when “1 Automatic” is selected.
Select whether to have sound on or off during the first level of forward search.
Select how software made for a widescreen television is displayed on a regular television {-► page 58).
Select whether to have dynamic range compression on or off during play of Dolby Digital software. Dynamic range is the difference between
the loudest sound and the softest sound. By compressing this range, you can listen at low volume but still enjoy clear dialog.
Select whether the picture type (!/P/8) is shown when a DVD is paused.
Select whether to output the video signal on NTSC discs as PAL 60 or as the original NTSC signal.
If you have connected a PAL system television, select “1 PAL 60”.
If you have connected a multi system television, select ”2 NTSC".
Lighter or darker picture.
RQT5327