Panasonic SC-DK2 - Manual (Page 23)

DISC
IЧ
П
U
Disc number
...-■■■[■•■■ ■■
d ( s 3 -J ■
©-42>T<3)
©—©-^ © о
MIX 2CH
© © ©^©
Programmed track no.
+
a - -
4'
Programmed order
►/A
r Ti
U JJ
H i .i;
Г IC’
other methods of disc play
CD
Remote control only
You can select up to 24 tracks to p!ay in the order you choose.
Preparation;
9 Press pVD/CD] to select disc as the source.
8 Ensure a Video CD or CD is in the play position tray.
(Program play is not possible if the play position tray contains a
DVD or is empty.)
1
While stopped
Press [PROGRAy].
2
Press [DISC] and
(within 10 seconds)
[1]-[5]
to select the disc.
3
Select the track with the numbered
buttons.
To select tracks numbered 10 and over
Press I>10] then the two digits.
Repeat steps 2 and 3 to program all tracks you want in the required
order.
4
Press [►/A].
All the tracks are played in the selected order.
Step 2 is not necessary when selecting a track from the disc current­
ly displayed.
To exit program mode
Press [PROGRAM] while stopped.
Program contents will be saved in the memory.
You can do the following while the disc is stopped
Press
p]
to cancel the resume function if it is on.
9 To check program contents
While "P” is displayed (E9)
Press or
Each time you press a button, the disc number, track number and
program order are displayed.
• To add to the program
Repeat steps 2 and 3.
8 To cancel tracks
From the last programmed
track Press [CANCEL].
A particular track While “P” is displayed
Select the track with
or [►►/►W] then
press [CANCEL].
All tracks Press p].
“CLEAR" is displayed.
When ‘‘CD FULL” is displayed
24 tracks have been programmed. No further tracks can be
programmed.
• Discs and tracks the unit cannot find can be programmed but are
canceled during play. This is also the case if you program a DVD.
• You can program individual tracks even if the disc is a Video CD
with PBC.
• Skipping is done in the programmed order.
RQT5327