Cub Cadet 8404 - Manual (Page 115)

TRANSMISSION
4-11 D615-W02 May-2003
615W414A
3.1 MAIN SHIFT
• The transmission shift lever (1) is located in left of
the driver’s seat and is connected to transmission
arm (3), transmission fork (4), and (5).
• One transmission shift lever is enabled from the
1st to the 4th stage and is easy to operate.
• If the transmission shift lever moved to left, the trans-
mission arm will be engaged with transmission fork
(4) in 1st and 2nd stage. If the lever is moved to the
front or rear, then the 1st and 2nd transmission shift
will be enabled.
• If the transmission shift lever is moved to the right,
the transmission arm will be engaged with trans-
mission fork (5) in 3rd and 4th stage. If the lever is
moved to the front or rear, 3rd and 4th transmission
shift will be engage.
(1) Transmission Shift Lever
(2) Main Transmission Shift Rod
(3) Transmission Arm
(4) Transmission Fork (1st, 2nd)
(5) Transmission Fork (3rd, 4th)
(6) Bearing Case
615W415A
3.2 SHUTTLE SHIFT
• Shuttle lever (1) is located to the left of the steering
wheel and connected to universal joint (2), trans-
mission arm (3), fork rod (4), and transmission fork
(5).
• If pushing shuttle lever (1), [Forward] transmission
will be done and if pulling it, [Reversing] done.
(1) Shuttle Lever
(2) Universal Joint
(3) Transmission Arm
(4) Fork Rod (Shuttle)
(5) Transmission Fork (Shuttle)
[A] FORWARD [B] REVERSE
3. TRANSMISSION SHIFT LINK STRUCTURE