Cub Cadet 8404 - Manual (Page 209)

FRONT AXLE
7-21 D615-W02 May-2003
615W742A
615W741A
1.0 mm (0.039 in.) 1.2 mm (0.047 in.)
9.6 CLEARANCE CHECK BETWEEN
DIFFERENTIAL PINION SHAFT AND
DIFFERENTIAL PINION
1. Measure O.D. of differential pinion shaft.
2. Measure I.D. of differential pinion shaft.
3. Check clearance as the measured value and if ex-
ceeding allowable limit, renew it.
Sect. Specified
Allowable
limit
Clearance between
differential pinion
and differential
pinion shaft
Differential
pinion I.D.
Differential
pinion O.D.
0.016 ~ 0.052 mm
(0.00063 ~ 000205 in.)
16.000 ~ 16.018 mm
(0.62992 ~ 0.63063 in.)
15.966 ~ 15.984 mm
(0.62858 ~ 0.62929 in.)
0.25 mm
(0.098 in.)
-
-
9.7 CLEARANCE CHECK BETWEEN FRONT
DIFFERENTIAL CASE, DIFFERENTIAL
CASE COVER AND DIFFERENTIAL SIDE
GEAR.
1. Measure O.D of differential side gear.
2. Measure I.D of differential side gear.
3. Measure I.D. of differential case cover.
4. Check the clearance as the measured value and if
it exceeds the allowable limit, replace it.
Sect. Specified
Allowable
limit
Clearance between
front differential
case, differential
case cover and
differential side gear
Front differential
case I.D.
Differential case
cover I.D.
Differential side
gear O.D.
0.016 ~ 0.052 mm
(0.00063 ~ 000205 in.)
32.050 ~ 32.050 mm
(1.26083 ~ 1.26181 in.)
32.025 ~ 32.050 mm
(1.26083 ~ 1.26181 in.)
31.959 ~ 31.975 mm
(1.225823 ~ 1.25886 in.)
0.25 mm
(0.098 in.)
-
-
-