Cub Cadet 8404 - Manual (Page 224)

CHAPTER 8 8354/8404
8-14 D615-W02 May-2003
615W816A
615W817A
• Loosen bolt (1) and disconnect power steering unit
(2).
(When reassembling)
• When attaching with power steering unit, apply bolt
with bonding agent and tighten to the specified
torque.
(1) Bolt (2) Steering Unit
Sect. Spec. Tightening torque
Power steering unit
tightening bolt M10 48.0 ~ 55.9 N·m
4.9 ~ 5.7 kgf·m
35.5 ~ 41.2 lbf·ft
Bonding agent Loctite #242 or equivalent
(1) Steering Hose Assembly T
(2) Steering Hose Assembly P
(3) Steering Hose Assembly R
(4) Steering Hose Assembly L
• Disengage steering hose (1), (2), (3), (4) connect-
ing nut and disconnect hose from power steering
unit (5).
(When reassembling)
• When connecting with power steering unit hose, make
sure color and connecting port of hose are correct.
Connecting port
T
P
R
L
Hose type
Steering hose assembly T
(Green color)
Steering hose assembly P
(Red color)
Steering hose assembly R
(White color)
Steering hose assembly L
(Yellow color)
Sect. Spec. Tightening torque
Steering hose
tightening nut PF 1/4 46.6 ~ 50.9 N·m
4.8 ~ 5.2 kgf·m
34.4 ~ 37.6 lbf·ft
8.2 POWER STEERING UNIT
A. Disassembly, Assembly
a. Disconnection of Power Steering Unit
Assembly
First Stage (Disconnection of Steering Hose)
Second Stage (Disconnection of Steering Unit)