Cub Cadet 8404 - Manual (Page 131)

TRANSMISSION
4-27 D615-W02 May-2003
615W444A
615W443A
E. Fifth Stage (Disconnection of Intermediate
Case and Clutch Housing)
1. Disengage the shuttle transmission arm (1) lock-
ing bolt (2) and pull up transmission arm.
2. Disengage tightening bolt (5) and nut (6) of clutch
housing (3) and intermediate case (4).
3. Disconnect clutch housing (3) from intermediate
case (4).
(When reassembling)
• Remove foreign matters or oil from the contacted
surface of the clutch housing (3) and intermediate
case (4) and apply a sealing agent.
• Perform docking clutch housing (3) and intermedi-
ate case (4) and then make transmission arm (1) of
shuttle transmission arm to be seated in the groove
(A) of shuttle fork rod.
Sealing agent Three bond 1208D or equivalent
(1) Shuttle Transmission Arm
(2) Flange Bolt
(3) Clutch Housing
(4) Intermediate Case
(5) Bolt
(6) Nut Sect. Spec. Tightening Torque
Tightening bolt, nut
Stud
M12
M12
77.5 ~ 90.2 N·m
7.9 ~ 9.2 kgf·m
57.2 ~ 66.5 lbf·ft
39.2 ~ 49.0 N·m
4.0 ~ 5.0 kgf·m
28.9 ~ 36.1 lbf·ft