Cub Cadet 8404 - Manual (Page 182)

CHAPTER 6 8354/8404
6-8 D615-W02 May-2003
6.2 MAINTENANCE
Check the clearance between brake lever bush and
brake shaft
1. Measure I.D. of brake lever bush.
2. Measure O.D. of brake shaft.
3. Calculate the clearance with the measured value. If
exceeding the allowable limit, replace bush.
Sect. Specified Allowable Limit
Clearance
between brake
lever bush and
brake shaft
I.D. of brake
lever bush
O.D. of brake
shaft
0.085 ~ 0.327 mm
(0.00335 ~ 0.01287 in.)
20.060 ~ 20.281 mm
(0.78976 ~ 0.79846 in.)
19.954 ~ 19.975 mm
(0.78559 ~ 0.78642 in.)
615W607A
(1) Brake Lever Bush (2) Brake Shaft
-
-
-