KEYENCE DL-DN1 - Manual (Page 55)

3-3 Explicit Messaging
3-29
3
Comm
u
nic
a
ti
ng
w
it
h th
e
SK-1
000 Se
ri
es
- DeviceNet Compatible Network Unit DL-DN1 User’s Manual (SK-1000) -
Setting/status command parameters
• For the communication methods using setting/status parameters,
see "Reading/Writing Settings or Status of a Sensor Amplifier" (page 3-23).
• To reduce the number of writes to the EEPROM, a write command is executed 2
seconds after it is received. If another command is received within 2 seconds, the
DL-DN1 waits for another 2 seconds before executing the two commands simulta-
neously. After the writing completes successfully, the "EEPROM writing result"
parameter becomes "successfully completed (1)". For example, if commands are
received continuously every second, they will not execute because the DL-DN1
remains "currently writing (0)". 2 seconds after the last command is received, the
commands received will be executed simultaneously.
• If data with a decimal point is used for a parameter range, ignore the decimal point
and read or write the data as an integer. For example, to write a HI setting value
(BANK 0) of "+1.235", write "+1235".
• Attribute R: Read; W: Write; R/W: Read/Write
• N: ID number of sensor amplifier; for example, if the ID number is 13, then N x 10 +
3 -> 133 (DEC).
• The data types are DINT unless explicitly specified.
InstID
(DEC) AttrID
(HEX)
Name Description Attribute
Default
value
Parameter range
Nx10+1
64 Group-1 entry count R 24
65 Sensor amplifier error *1 R
0: Overcurrent error
1: EEPROM error
2: Head error
3: 0 (fixed)
4: 0 (fixed)
5: 0 (fixed)
6: 0 (fixed)
7: Head temperature/humidity error
8: 0 (fixed)
9: 0 (fixed)
10: 0 (fixed)
11: Amplifier communication error
12: 0 (fixed)
13: 0 (fixed)
14: 0 (fixed)
15: 0 (fixed)
66 to
67
Reserved
68 Judgment output/Alarm output
*2
*17
R
0: HI judgment output 0: OFF, 1: ON
1: LO judgment output 0: OFF, 1: ON
2: GO judgment output 0: OFF, 1: ON
3: Alarm output 0: OFF, 1: ON
69 Judgment value (P.V.) *3 R -99.999 to +99.999
6A Internal measurement value (R.V.) R -99.999 to +99.999
6B Peak-hold value in hold mode *4 R -99.999 to +99.999
6C Bottom-hold value in hold mode *5 R -99.999 to +99.999
6D to
6E
Reserved
6F Bank status R
0: Bank 0
1: Bank 1
2: Bank 2
3: Bank 3
70 Timing status R
0: During sampling
1: Not during sampling
71 Temperature *6 R -999.9 to +999.9
72 Humidity *7 R 0.0 to 100.0