KEYENCE LK-G5000 Series - Manual (Page 23)

23
Optional Parts
■ Non-voltage input 2 (TIMING/TIMING1)
Name Model Appearance Description
Neutral density filters
LK-F2
(LK-H150/155/152/157)
Used when the mirror surface is measured at a mirror
reflection setup. (M1.6 x 3 countersink-head screw x 2)
LK-F3
(LK-H80/85/82/87)
Display panel housing OP-84426
Used to combine the display panel (LK-HD500) and
controller (LK-G5001/LK-G5001P).
Display panel
cable
33 cm OP-84427
A cable used to connect the display panel (LK-HD500/
LKHD1001) and controller (LKG5001/LK-G5001P).
3 m OP-51655
10 m OP-51656
I/O Expansion connector cable
(3 m)
OP-51657 I/O cable for the expansion connector (3 m).
RS-232C cable OP-96368 A communication cable for RS-232C (2.5 m).
RS-232C conversion adapter OP-26401
A conversion adapter for a D-sub 9-pin connector. This
connector is used in combination with the OP-96368.
RS-233C conversion adapter OP-96369
A conversion adapter for a D-sub 25-pin connector. This
connector is used in combination with the OP-96368.
USB cable OP-66844 A cable for USB connection (2 m).
Key-operated switch OP-86982 Key-operated switch for laser emission control
Ethernet cable OP-66843 Cross cable (3m) for Ethernet communication
OP- 264 01
OP- 963 69
OP- 264 01
OP- 963 69
OP- 264 01
OP- 963 69
OP- 264 01
OP- 963 69
OP- 264 01
OP- 963 69