KEYENCE LK-G5000 Series - Manual (Page 5)

5
Sending settings
Receiving settings
Displaying measurement values
Once the button for “Send settings to controller” is clicked, the settings that have been created in LK-Navigator 2 will be applied
to the controller.
Once the button for “Receive settings from controller” is clicked, the controller settings will be downloaded to LK-Navigator 2.
This is useful when checking the settings that are currently being used.
Using LK-Navigator 2, it is possible to check the current measurement values. Once the “View Measurement Value” button has
been clicked, the Measurement Value Display window will appear.
Once the button for “Measurement value acquisition start” in this window is clicked, it will be possible to check the measurement
values.
Once the window is opened, the "Measurement
Value Display" screen will be on standby. By
clicking the "Measurement value acquisition start”
button, it will be possible to acquire measurement
values from the controller. By clicking the "Select
Display" button, it will be possible to select the OUT
number that will be displayed in the Measurement
Value Display window.