KEYENCE LK-G5000 Series - Manual (Page 8)

8
4 OUT settings
OUT settings
With the LK-G5000, measurement values can be calculated and displayed for each OUT. At default, the number of used OUTs is 2,
and up to 12 can be set. The number of used OUTs can be set in the environment settings.
*Once the “No. of used OUT” is changed, all programs will be initialised. The number of used OUTs must be the first thing to be set.
These settings related to measurement value processing.
Calculation method
Sets which sensor head will display measurement values to which OUT and performs calculations between these measurement
values.
With the settings listed above, measurement values that have been measured with head 01 will be displayed at OUT1.