KEYENCE LS-Navigator - Manual (Page 30)

4
LS-Navigator-M-NO4-E 4-4
4-2 Basic Procedures for Operation
3
Select the model of the controller
connected to the computer from the
following options.
LS-7000 Series, LS-7600/LS-7500 Series
Note
The model of the controller connected to the
computer must be the same as the model selected in
this window on LS-Navigator.
4
Select the method for reading the setting
contents from the following options.
Read controller settings, Read from file, Start
with defaults
■ When [Read controller settings] is
selected
After the [Communicating...] message appears,
the [Parameter update results] message is
displayed. Click on the [OK] button to display the
main window.
Note
When selecting [Read controller settings], click on
the [Communication Settings] button and change the
values in the [Communication settings] dialog so that
the values for the RS-232C communication
conditions on the software are the same as on the
controller. Click on the [Comm check] button to check
whether the RS-232C communication conditions are
the same on the controller and the computer.
For more details, see “Setting RS-232C
Communication Conditions” (Page 5-12) in this
manual.
■ When [Read from file] is selected
The [Open] dialog appears. Select the file to load
and click on the [Open] button to display the
main window.
For more details, see “Reading setting files”
(Page 5-3).
■ When [Start with defaults] is selected
The [Select the settings to display at startup]
window disappears and the main window is
displayed.
4 3