KEYENCE LS-Navigator User Manual
Page 46
5
LS-Navigator-M-NO5-E
5-14
5-7 Setting RS-232C Communication Conditions
5
Select the port for RS-232C
communication.
Select between COM1 to COM8 from the pull-
down menu.
Select the serial port number on the computer for
the connected controller.
6
Click on the [Next] button.
A message appears on the [Setting Wizard],
instructing the user to switch the controller to the
environment settings display. Use the following
procedure to display the environment settings for
the controller.
■ For the LS-7600/7500 series
Press and hold the [ESCAPE] button for at least
three seconds while in [Setting] menu of the
controller. The controller switches to the
environment settings display.
■ For the LS-7000 series
Press the [PROG] key while pressing the [FUNC]
key in the sub-display menu for the controller.
The display switches to [PROG]. Press the
[FUNC] key to switch the display to [RS-232C].
For both the LS-7600/LS-7500 series and
the LS-7000 series
5
For the LS-7600/7500 series
For the LS-7000 series
6
6