When starting up, General application – KEYENCE LS-Navigator User Manual
Page 61
A-3
LS-Navigator-M-APP-E
1 Error Message List
A
Saving and reading settings
Output settings
Limit settings
Settings list
Reference: An error message may be displayed from the Windows OS.
Error message
Cause
Reference page
The file name is too long.
The file path name is too long. (The maximum path
name length is 255 characters.)
Failed to read the file.
Check that the correct file is set.
The file may be corrupted.
The file may be an incorrect type of data.
Error message
Cause
Reference page
Set the value for scaling within the range.
Set the value for scaling within the range.
See the “Analog Output Settings” section in the “User’s
Manual” for each controller.
Error message
Cause
Reference page
The upper limit must be larger than the lower limit.
The lower limit is larger than the upper limit.
The value exceeds the standard value + upper limit. Set
the value between ( ) and ( ).
* The values displayed within the parentheses ( ) vary
depending on the units and the minimum display unit.
The value exceeds the setting range for standard value
+ upper limit.
See the “Units, Default Minimum Values, and Setting
Ranges” section in the “User’s Manual” for each
controller.
-
The HH setting must be larger than the HI setting.
The HI setting is larger than the HH setting.
The LO setting must be larger than the LL setting.
The LL setting is larger than the LO setting.
The HOLD-H value must be larger than the HOLD-L
value.
The HOLD-L value is larger than the HOLD-H value.
Error message
Cause
Reference page
Failed to copy to the clipboard.
When the Windows OS fails to copy to the clipboard.
When starting up
Error message
Cause
Reference page
Start with defaults.
Appears when related files start up automatically and
the reading process fails.
General application
Error message
Cause
Reference page
The HELP file cannot be opened.
When the PDF HELP file cannot be opened because
the HELP file does not exist or Adobe Reader is not
installed.
-