KEYENCE LS-Navigator - Manual (Page 38)

5
LS-Navigator-M-NO5-E 5-6
5-4
Viewing the Measurement Value
The measurement values that are measured on the controller can be monitored in real time on the computer.
Note
The communication settings for the computer and the controller must be set correctly for this function to operate.
The settings can be verified by clicking on the [Comm check] button in the [Communication settings] menu. This menu
can be displayed by clicking on the [Com settings] button on the tool bar.
See “Setting RS-232C Communication Conditions” (Page 5-12) in this manual.
1
Select [Measure view] from the [View]
menu.
Or click on the [Measurement view] icon on
the tool bar.
The [Measure view] window appears.
2
Click on the [Start measure] button in the
[Measure view] window.
The measurement values from the controller
appear in the [Measure view] window.
1 . Switches between starting and stopping acquisition of the measurement value.
2 . When a check mark is placed in the box, the measurement value for [OUT1] on the controller is displayed.
3 . When a check mark is placed in the box, the measurement value for [OUT2] on the controller is displayed.
4 . Displays the level of the limit judgment.
5 . Turns on or off the [Auto zero] function.
See the “Automatic Zero Function” section in the “User’s Manual” for each controller.
6 . Turn this option on to control both OUT1 and OUT2 simultaneously.
7 . Turns on or off [Timing].
Use with the measurement mode function to control the measurement.
8 . Resets the measurement values.
1
1
2
6 8 7 7 5
1 2 3
4 5 8
3 4