Kofax INDICIUS 6.0 User Manual
Page 113
Advertising
Using Verification
User’s Guide
101
Step 2: The verify-keyer enters the value from the form image.
Figure 6-72. Value Entered by Verify-keyer
Step 3: A data mismatch occurs. The previously captured values are displayed above
the field for reference.
Figure 6-73. Data Mismatch
Step 4: The verify-keyer re-enters the value having checked it on the image.
Figure 6-74. Correct Value Re-Entered by Verify-keyer
Step 5: The new value is then accepted. This is the verified value, which is written in
the output for this document.
Note
The yellow tip is often turned off in production systems. In this case you need
to re-key exactly what is on the image (and press Enter) until the value is accepted.
Advertising