Kofax INDICIUS 6.0 - Manual (Page 47)

Using Document Review
User’s Guide 35
nothing and the menu item is disabled) then it has not been configured for your
solution.
X To open the Change Document Type dialog when a document is selected,
press F9.
X To open the Change Document Type dialog when a page is selected,
press
Shift+F9.
X To enter a document type that has been defined in the list
1 In the Change Document Type dialog, start keying the type; the first
matching value will automatically be selected in the list.
2
Once the correct value has been selected, press Enter to commit it to the
document and move to the next problem.
X To enter a type that has not been defined in the list
1
In the Change Document Type dialog, press F9 again to change the entry
mode. This will turn off auto complete and hide the defined document types
list. A blue background will display.
2
Enter the document type and press Enter.
X To change the document type to the Quick Select document type,
with a
page or document selected, press F8 to change the document type to the Quick
Select document type.
Note If no document types have been defined, the alternative entry mode (normally
activated by pressing F9) will automatically be entered.
If only document types that are defined are allowed, the alternative entry mode will
not be entered.
The Change Document Type dialog can also be opened by right clicking on the
document and selecting the option from the menu.
If the Quick Select menu item is not enabled, it has not been configured for your
solution.
Entering Page Types
Page types may be entered only when a page is selected. The entry of page types will
depend on whether all the types have been pre-defined or not.