Using completion, Introduction, Chapter 5 – Kofax INDICIUS 6.0 User Manual
Page 69
Advertising
User’s Guide
57
Chapter 5
Using Completion
Introduction
The Completion module is used to fill in any gaps left in the data captured during
Recognition and Correction. It also performs document level validations, checking
that data is compatible across several fields within the document. For example, if
someone has completed a check box to say they are paying by Visa card, the card
number field must also be complete.
Note
Some of the features documented in this section may not be applicable in your
solution. Please check with your Systems Administrator for any areas of functionality
that are not relevant to you.
Advertising