Compaq ProLiant Interconnect Switch - Manual (Page 104)

Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
4-8 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
• System Location—A user-assigned description for the physical location of the GbE
Interconnect Switch.
• System Contact—The name of the person to contact if there are any problems or
questions with the system. You may also want to include a phone number or extension.
To complete the user-assigned GbE Interconnect Switch information:
1. Type the system name in the System Name field.
2. Type the physical location of the GbE Interconnect Switch in the System Location field.
3. Type the name of the contact person responsible for the GbE Interconnect Switch (and
telephone number or other contact information) in the System Contact field.
4. Click Apply.
NOTE: To save the configuration settings permanently, they must be entered into NVRAM using
the Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,”
earlier in this chapter.
Configuring Advanced Settings
When you select Advanced Settings from the Configuration menu, the following screen is
displayed.
You can change the following parameters:
• Auto Logout of Console & Telnet—Select the time that the interface can be idle before
the GbE Interconnect Switch automatically logs-out the user. The options are 2 minutes,
5 minutes, 10 minutes, 15 minutes, and Never.