Compaq ProLiant Interconnect Switch User Manual
Page 70
Configuring the GbE Interconnect Switch Using the Console Management Interface
3-34
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Configuring the Threshold of Broadcast/Multicast/DA-Unknown Storm
To configure the threshold of a broadcast, multicast, or DA-Unknown Storm:
1. Highlight
Configure Threshold of Broadcast/Multicast/DA-Unknown Storm on the
Configuration menu.
2. Press
the
Enter key. The following screen is displayed.
3. Toggle the desired storm option to Enabled. Leave the other two options Disabled.
4. Type a threshold in the Threshold (Pkts/sec) field.
5. Highlight
APPLY and press the Enter key.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.