Monitoring gbe interconnect switch functions, Monitoring gbe interconnect switch functions -42 – Compaq ProLiant Interconnect Switch User Manual
Page 78
Configuring the GbE Interconnect Switch Using the Console Management Interface
3-42
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
— Auto-Logout—Specifies length of time a management session can be idle. When
this time has expired, the GbE Interconnect Switch management agent will
disconnect the user. The default value is 10 minutes.
— Serial Port For—Select Console or SLIP.
— Local IP Address—Local IP address of the SLIP connection.
— Remote IP Address—Remote IP address of the SLIP connection.
— MTU—Maximum transfer unit (MTU) specifies the size of the transferring IP
packets. The default value is 1006.
3. After making your changes, highlight APPLY then press the Enter key.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.
Monitoring GbE Interconnect Switch Functions
The GbE Interconnect Switch provides extensive network monitoring capabilities.
To display the network data compiled by the GbE Interconnect Switch:
1. Highlight
Network Monitoring on the main menu.
2. Press
the
Enter key. The following menu is displayed.