Compaq ProLiant Interconnect Switch - Manual (Page 162)

Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide C-1
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:08 AM
C
Runtime Switching Software Default Settings
The GbE Interconnect Switch is configured with the following factory default settings:
• Table C-1 contains general default settings for both Switch A and Switch B
• Table C-2 contains Port Names, VLANs, STP/ByPass, Trunking Default Settings for
Switch A
• Table C-3 contains Port Names, VLANs, STP/ByPass, Trunking Default Settings for
Switch B
Switch A and Switch B: General Default Settings
Switch A and Switch B are configured with the following general default settings:
Table C-1: Switch A and Switch B: General Default Settings
Setting Value
User Name None
Password None
DHCP Service Enabled
Bootup Service Disabled
IP Address (if manual IP option is selected) Switch A = 10.90.90.90
Switch B = 10.90.90.91
Subnet Mask (if manual IP option is selected) 255.0.0.0
Default Gateway (if manual IP option is selected) 0.0.0.0
Management VID 1
System Name None
System Location None
System Contact None
Auto Logout 10 minutes
MAC Address Aging Time 300 seconds
IGMP Snooping Disabled
continued