Saving the history log to a tftp server, Saving the history log to a tftp server -57 – Compaq ProLiant Interconnect Switch User Manual
Page 93
Configuring the GbE Interconnect Switch Using the Console Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
3-57
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Saving the History Log to a TFTP Server
To save the History Log on a TFTP server:
1. Highlight
Save History Log to TFTP Server on the Switch Utilities menu.
2. Press
the
Enter key. The following screen is displayed.
3. Type the IP address of the TFTP server in the Server IP Address field.
4. Type the path and filename for the history log on the TFTP server in the Path\Filename
field.
5. Highlight
APPLY and press the Enter key to make the changes current.
6. Highlight
START and press the Enter key to initiate the file transfer.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.