Configuring class of traffic – Compaq ProLiant Interconnect Switch User Manual
Page 74
Configuring the GbE Interconnect Switch Using the Console Management Interface
3-38
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Configuring Class of Traffic
To configure traffic class:
1. Highlight
Configure Traffic of Class on the Configure Class of Service, Default
Priority and Traffic Class menu.
2. Press
the
Enter key. The following screen is displayed.
3. Toggle
the
Priority fields to set the traffic class for the eight levels of priority for the
GbE Interconnect Switch. Class values are from 0 to 3.
4. Highlight
APPLY and press the Enter key.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.