Displaying current port egress bandwidth settings, Configuring spanning tree protocol, Configuring spanning tree protocol -19 – Compaq ProLiant Interconnect Switch User Manual
Page 55
Configuring the GbE Interconnect Switch Using the Console Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
3-19
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Displaying Current Port Egress Bandwidth Settings
To view port egress bandwidth settings:
1. Highlight
Display Current Port Egress Bandwidth on the Bandwidth
Configuration menu.
2. Press
the
Enter key. The following screen is displayed.
This read-only screen displays current egress bandwidth information.
Configuring Spanning Tree Protocol
STP operates on two levels: the GbE Interconnect Switch level and the port level. On the
GbE Interconnect Switch level, the settings are globally implemented. On the port level, the
settings are implemented on a user-defined group basis.