Compaq ProLiant Interconnect Switch - Manual (Page 124)

Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
4-28 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
Configuring the Class of Traffic
When you select Class of Traffic from the Configuration menu, the following screen is
displayed.
The Configure Class of Traffic window allows you to configure traffic class priority by
specifying the class value, from 0 to 3, of the eight levels of priority of the GbE Interconnect
Switch.
To set traffic class priority:
1. Select the class value for each priority.
2. Click Apply to save the changes.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,”
earlier in this chapter.