Quadt interconnect module panel, Quadt interconnect module panel -12, Quadt interconnect module connectors -12 – Compaq ProLiant Interconnect Switch User Manual
Page 23
Introduction
1-12
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:55 AM
QuadT Interconnect Module Panel
One QuadT Interconnect Module is inserted into the rear side of each GbE Interconnect
Switch. Each QuadT Interconnect Module has four RJ-45 connectors with link activity and
speed LEDs for uplink network cabling. Two RJ-45 connectors support Gigabit Ethernet
connections and two support 10/100 Ethernet connections for uplink connectivity.
NOTE: To the side of the two Gigabit Ethernet RJ-45 connectors are LEDs reserved for stacking
support. Stacking functionality is planned for a future release of GbE Interconnect Switch firmware.
5
6
7
8
1
2
3
4
Figure 1-7: QuadT Interconnect Module connectors
Table 1-4: QuadT Interconnect Module Connectors
Item Description
1
Port (22x) RJ-45 connector for 10/100/1000Base-T uplink on Switch B
2
Port (21x) RJ-45 connector for 10/100/1000Base-T uplink on Switch B
3
Port (20x) RJ-45 connector for 10/100Base-T uplink on Switch B
4
Port (19x) RJ-45 connector for 10/100Base-T uplink on Switch B
5
Port (22x) RJ-45 connector for 10/100/1000Base-T uplink on Switch A
6
Port (21x) RJ-45 connector for 10/100/1000Base-T uplink on Switch A
7
Port (20x) RJ-45 connector for 10/100Base-T uplink on Switch A
8
Port (19x) RJ-45 connector for 10/100Base-T uplink on Switch A