Compaq ProLiant Interconnect Switch - Manual (Page 42)

Configuring the GbE Interconnect Switch Using the Console Management Interface
3-6 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Saving Changes
The GbE Interconnect Switch has two levels of memory, normal RAM and non-volatile
RAM (NVRAM). Configuration changes are made effective on a screen by highlighting
APPLY, then pressing the Enter key. When this is done, the settings are immediately applied
to the switching software in RAM.
Some settings require you to restart the GbE Interconnect Switch before they will take effect.
Restarting the GbE Interconnect Switch erases all settings in RAM and reloads the stored
settings from NVRAM. Thus, it is necessary to save all setting changes to NVRAM before
rebooting the GbE Interconnect Switch.
To retain any configuration changes permanently in NVRAM:
1. Highlight Save Changes on the main menu.