Compaq ProLiant Interconnect Switch - Manual (Page 58)

Configuring the GbE Interconnect Switch Using the Console Management Interface
3-22 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
7. Type the Spanning Tree priority in the Priority field.
8. Toggle the ByPass field to Yes to enable the GbE Interconnect Switch to skip the usual
waiting time associated with the listening state. (This is also known as fast forward.)
9. Highlight APPLY and press the Enter key.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.
Configuring the Static (Destination-Address Filtering) Table
To configure the Static (Destination-Address Filtering) Table:
1. Highlight Configure Static (Destination-Address Filtering) Table on the
Configuration menu.
2. Press the Enter key. The following menu is displayed.
The Configure Static (Destination-Address Filtering) Table menu allows you to access
screens to create, modify, and delete both the Static Unicast Filtering Table and the Static
Multicast Filtering Table.