Verification of users – FingerTec TA300 User Manual
Page 11
10
CONTENTS
CONTENTS
There are different operations of Mifare cards in TA300.
Create PIN card:
Creating identification card without storing any fingerprint into the card.
The card user must do prior enrolment into TA300 with either fingerprint or password.
Press PW/Card > FP Card Mng > Create PIN Card > Insert User ID > Wave the card at the
induction area > Write Suc > OK (save) > ESC to return to the main menu.
Enroll FP Card:
Enrolling a new user and writing his fingerprint directly into the Mifare
card. A fingerprint is not stored inside the TA300.
Press PW/Card > FP Card Mng > Enroll FP card > Insert User ID > Place your finger on the
sensor to capture fingerprint for 3 times > OK > Wave the card at the induction area >
Write Suc > OK (Save) > ESC to return to the main menu.
Create FP Card:
Copying a fingerprint of a user from a TA300 into a Mifare card.
Press PW/Card > FP Card Mng > Create FP Card > Insert User ID > Wave the card at the
induction area > Write Suc > OK (Save) > ESC to return to the main menu.
Reg FP Card:
Registering a Mifare card that has been enrolled in another FingerTec® termi-
nal to a TA300. TA300 can only read a particular Mifare card after this operation.
Press PW/Card > FP Card Mng > Reg FP Card > Wave the card to the induction area > Write
Suc > OK (Save) > ESC to return to the main menu.
Unreg FPCard:
Deregister a particular Mifare card from TA300. TA300 stops to read the
card after this operation.
Press PW/Card > FP Card Mng > Unreg FP Card > Wave the card at the induction area >
Write Suc > OK (Save) > ESC to return to the main menu.
Empty Card:
This feature is to clear the contents of Mifare card.
Press PW/Card > FP Card Mng > Empty Card > Wave the card to the induction area > Write
Suc > OK (Save) > ESC to return to main menu.
Dup FP Card:
Copying a fingerprint from a Mifare card into TA300. The user can verify
fingerprint directly at the TA300.
Press PW/Card > FP Card Mng > Dup FP Card > Wave the card at the induction area > Write
Suc > OK (Save) > ESC to return to the main menu.
Move to FP Card:
Copying fingerprint from TA300 into a Mifare card. A fingerprint in
TA300 would be deleted after the operation.
Press PW/Card > FP Card Mng > Move to FP Card > Insert User ID > Wave the card to the
induction area > Write Suc > OK (Save) > ESC to return to the main menu.
Card only:
Press PW/Card > FP Card Mng > Card Only > Set Yes or No by pressing IN or OUT
button > OK (Save) > ESC to return to the main menu.
Yes
– TA300 will only read the Mifare card for user verification without asking for finger-
print verification.
NO
– TA300 will only read the Mifare card and will request user for fingerprint verification.
Verification of Users
Fingerprint users can choose to use either “1 to 1” or “1 to Many” methods.
1 to 1 fingerprint verification:
Insert user ID > OK > Place finger on sensor to capture
fingerprint > Result of verification.