FingerTec TA300 - Manual (Page 5)

 CONTENTS CONTENTS CONTENTS CONTENTS
tUrning oFF/on terMinal
Turning OFF press and hold the button for 3 sec.
Turning ON press once.
Connecting Terminal To A Computer
Connect terminal to PC USB port using the USB cable. If you are using more than one
unit of Terminal, you can only connect one unit of Terminal to PC USB at a time. Unplug
terminal from the PC after data transfer is done, and then plug another unit to repeat
the process.
Registering Terminal
Make sure that you register your terminal’s warranty with us at fingertec.com/ver/eng-
lish/e_warranty.htm .