Results of verifications, Deleting user, Access level/privilege – FingerTec TA300 User Manual
Page 12
11
CONTENTS
CONTENTS
1 to Many fingerprint verification:
Place finger to sensor to capture fingerprint > Result of
verification.
Note:
For users who are always fail to verify fingerprint by 1 to Many method, it is recommended
to use 1 to 1 method.
Password verification:
Insert User ID > OK > Insert password > OK > Result of verification
Verification of RFID card users:
Wave RFID card to the induction area > Result of verification.
Verification of Mifare card users:
Wave Mifare card to the induction area > Place finger to
sensor to capture fingerprint > Result of verification
Some precautions have to be taken to get a good read every time.
· Make sure the centerpoints of your finger is placed in the middle of the scanner for a
good read.
· Recommended to use index finger. TA300 accepts other fingers but index is the most
convenient.
· Make sure the finger is not wet, too dry, injured or dirty
· Do not press hard on the sensor, just place it comfortably
· Avoid direct sunlight or bright light during verification process
Results of Verifications
Voice / Message
what does it mean?
“User ID XXXXX”
Identity verification is successful, TA300 stores the transactionlogs to indi-
cate presence.
“Please Try Agn”
Identity verification is failed because the finger is not properly positioned
or the template is not available in TA300.
“Admin Affirm”
You are not administrator of the system and you cannot access Menu
page
“Error Pwd”
Identity verification is failed because you have entered the wrong pass-
word into TA300
“Invalid Card”
The card you are using is not enrolled or the card is damaged.
Deleting User
Only an administrator can do user deletion at TA300.
To delete certain user(s), press Del > Insert User ID to delete > OK > ESC to return to the
main menu.
Access Level/Privilege
TA300 offers two types of access level or privilege.
privilege
what can you do?
Normal User
Only use TA300 to verify your identity. You cannot access into Menu and
make changes into settings and system
Administrator
You are allowed to access into menu to enroll users and edit settings and
system