FingerTec Keylock 8800 Manual - Manual (Page 12)

12 CONTENTS
CARD ONLY OPTION
Should you want to use Card Only for Keylock 8800 without applying any other
verification methods, set it here: Menu > Options > Operate Opt > Card Only > Y/N
(MiFare model only)
RESETTING TO ORIGINAL FACTORY SETTINGS
There are some instances, which require you to restore Keylock 8800 to original fac-
tory settings. Upon completion of this task, your previous settings would no longer be
available. You need to do all the settings to suit to your requirements. Menu > Options
> System Opt > Adv Options > Reset Opts
DELETING LOGS
Logs are the data stored by Keylock 8800 after enrolment and verification. Once you
deleted the logs in Keylock 8800, data could not be retrieved again. Please be sure
before you carry out this function, as the function cannot be undone. Menu > Options
> System Opt > Adv Options > Del Logs > OK
CLEARING ALL DATA
To clear all data in Keylock 8800, not only the transaction logs but also user informa-
tion. Please be sure before you carry out this function, as the function cannot be un-
done. Menu > Options > System Opt > Adv Options > Clear All Data > OK
CLEARING ADMIN PRIVILEGE
Keylock 8800 offers two user privileges, Supervisor and Normal User. Clearing the ad-
min privilege is deleting supervisor from the system making the system vulnerable for
access. Be sure before you perform this function. Menu > Options > System Opt > Adv
Options > Clr Admin Privilege > OK
NOTE: When administrator’s fi ngerprint templates are deleted, no new user enrollment could be
performed without doing a new supervisor’s enrollment. However, a normal user could assign
himself as an administrator to access the system menu.
DELETE S LOGS
S logs stands for scanner logs, which means the number of times the scanner has
been used for verification, regardless of successful or not. To delete the scanner
logs: Menu > Options > System Opt > Adv Options > Del SLogs > OK
(MiFare model only)