Chapter 5 • managing usb flash disk, Using usb to download/upload data, Using usb to download logs – FingerTec Keylock 8800 Manual User Manual
Page 13: Using usb to download users, Using usb to upload users, Using usb to update firmware, 5 • managing usb flash disk
5 •
Managing USB Flash Disk
USING USB TO DOWNLOAD/UPLOAD DATA
USB flash disk is useful to download and upload data from Keylock 8800. The only way
Keylock could communicate with the PC is through data transfer via USB. To determine
the type of USB compatible by FingerTec® terminal, please refer to this link at
fingertec.
com/newsletter/HL_74.html
You have to insert a USB flash disk at the USB port located inside the back of the Keylock
8800 terminal. Refer to page3. Once the USB flash disk is ready, run this function: Menu >
PenDrive Mng
USING USB TO DOWNLOAD LOGS
Logs for verification done at Keylock 8800 can be downloaded to TCMS via USB. Menu >
PenDrive Mng > Download Lg
USING USB TO DOWNLOAD USERS
To download users from keylock 8800 to Software: Menu > PenDrive Mng > Download
User
USING USB TO UPLOAD USERS
To upload users from Software to Keylock 8800: Menu > PenDrive Mng > Upload User
USING USB TO UPDATE FIRMWARE
To upload firmware to Keylock 8800: Menu > PenDrive Mng > Upd FW