FingerTec Keylock 8800 Manual - Manual (Page 6)

6 CONTENTS
Item Function
Keyhole Open the cover to find the keyhole if you want to unlock the door by
using a mechanical key.
Battery Slots To insert four pieces of standard AA batteries for power
USB Port To connect the USB extension provided to download/upload data
from/to Keylock 8800
Battery Indicating the life of the batteries in the Keylock 8800.
Time / Date Showing the time and date set for the Keylock
8800
Status Displaying Status of the Keylock 8800. “Keylock 8800”
gives an indication that the Keylock is ready for use.
REACTIVATING KEYLOCK 8800
Keylock 8800 is an energy-saving devise. Right after every use, the Keylock 8800 will
return to its idle status. Press the OK/Menu button to reactivate Keylock 8800.
KEYPAD
To return to the previous instruction / To input number 1
To go up and to change the number ascendingly / To input number 2
To go down and to change the number descendingly/ To input number 3
To input number 4
To access to main menu and to confirm a certain instruction
HOW TO ACCESS MAIN MENU
Administrator is required before any fingerprint users are enrolled inside the Keylock
8800. When administrator’s fingerprint templates are deleted, no new user enroll-
ment could be performed without doing a new supervisor’s enrollment. However, a
normal user could assign himself as an administrator to access the system menu.
To register as an administrator:
Keep on pressing OK/Menu button (approximately 5-8s) until you can view the Main
Menu. Only enrolment of administrator is allowed when you access it the first time.
Press OK/Menu (long) > User Manage > Enroll Admin > Choose between these 3 en-
rolment types: Enroll FP/ Enroll PWD / Reg RFID > Follow the instructions given on the
screen > Press OK(Save) to save to Main Menu