FingerTec Face ID 4 Manual - Manual (Page 21)

21 CONTENTS CONTENTS CONTENTS CONTENTS
 • USB
Understanding the Need for USB Flash Disk
Communication between the Face ID  and a PC is very important to upload and
download transaction data for time attendance and door access reports. The Face
ID  offers communication options such as LAN and USB (Universal Serial Bus)
connectivity. USB can connect Face ID with a computer for download and upload
of user information and transaction logs.
Type of USB
There are various types of USB flashdisks available in the market. The Face ID 
can only work with USB flash disks that supports minimum Linux Kernel 2..x,
works fine with Imation, Transcend and Pen Drive (minimum support Linux Ker-
nel 2..x) To determine the type of USB compatible by FingerTec terminal, please
refer to this link at fingertec.com/newsletter/HL_.html
Downloading Attendance Logs
To download attendance logs from the Face ID  to the computer: Menu > USB >
Download Transactions. After the download process is complete, eject USB flask
disk from the Face ID  and connect it to your PC that has been installed with the
TCMS V2. Upload the data from the USB into the TCMS V2 for further processing.
Downloading User Data
Enrollment of user must be done at the Face ID  and during enrollment user
data such as name and user ID are inputted. To sync the data in the Face ID  and
computer: Menu > USB > Download User
Uploading User Data from USB to Terminal
While an administrator can input user data into the Face ID , the rest of the user
information is completed in TCMS V2. Get the latest updates of user information
from TCMS V2 to the Face ID  terminal using USB Flash Disk. Menu > USB > Up-
load User
Uploading User Photo
User photo can be included in user information in TCMS V2. To get the same
photos being displayed when users gets verified, upload the user photo from the
TCMS V2 to Face ID. The size of each photo must be 20 x 20 resolution. To do it
using USB Flash Disk: Menu > USB > Upload User photo