FingerTec Face ID 4 Manual - Manual (Page 9)

9
Back Plate
 feet / 1.2 meter
(recommended)
s u p p o r t @ f i n g e r t e c . c o m
DC12V 3A
Power Supply
TCP/IP Port
TCP/IP
CONTENTS CONTENTS CONTENTS CONTENTS
 • CONNECTION – SYNCING TERMINALS
Installation
FingerTec terminals offer several connections for power and communications. To in-
stall the Face ID , follow the instructions below.
Mount On Wall
Attach the back plate
on to the wall securely
and attach the ter-
minal on to the back
plate when mounting
it on the wall.
Communication Diagrams
Connection points for power and communication are available at the back of the
terminal. Refer to the following diagrams for the correct installations.