Running digipay in a network – FingerTec DiGiPAY User Manual
Page 59
Advertising
figure
5.11
figure
5.12
rUnnIng DigipAy In A nETwork
This part is provided as a guideline for those who are planning to use a single copy of installed
DiGiPAY from a few workstations within the same network. You must assign a particular computer
as a Server.
SErvEr SETTIng Up A SErvEr:
1. Install the DiGiPAY software in the Server as usual.
2. Plug in the Network Control Device at the Printer Port.
3. At Desktop, double click My Computer. Look for DiGiPAY directory and double click on it.
Advertising