FXpansion GURU - Manual (Page 34)

33
• Click on one of these buttons to edit that layer in the Pad Edit
view. Please note that if no sample is currently loaded into the
layer, a “No layer loaded” message will appear in place of the
waveform display.
• You can then drag and drop a new sound from the Browser
(either a Hit or a slice in a loop ‘expanded’ by using the but-
ton next to its filename) onto the Pad or the waveform display
to assign it to the current layer (when not in Auto mode).
• Alternatively, if you want to use Auto mode, click the sound
in the Browser (either a Hit or a slice in a loop ‘expanded’ by
using the button next to its filename). The sound will be
previewed in context on the current layer.
Velocity Split
By default, all layers are played simultaneously whenever the
Pad is triggered. However, the layers can be velocity-split, with
different layers responding to different velocities. Clicking the
Velocity split button reveals the Velocity split display:
The graphic shows each velocity split, with splits 1 to 8 ar-
ranged from left to right (the x-axis represents velocity from
0 at the left to 127 at the right) The currently edited split is
highlighted in green.
The red vertical indicator line represents the velocity of the last
Pad trigger. This is very useful in visualising how you need to
split velocities.
Layer display off (default)
Layer display on, no velocity split
(all layers play simultaneously)
Layer button
Other used layers
Current layer
Velocity split button
Current layer
Last triggered velocity indicator
Other used layers