FXpansion GURU - Manual (Page 85)

84
Freq-Depth (0 to 100%)
The amount of modulation applied to the Freq parameter by the envelope follower.
Bits-Depth (0 to 100%)
The amount of modulation applied to the Bits parameter by the envelope follower.
Modtype
(stereo +, linked +, stereo -, linked -, stereo +- linked +-)
This control allows you to choose between several types of stereo modulation.
Ring Modulation LFO and ENV effects
• RING-MOD-LFO
• RING-MOD-ENV
These ring modulators multiply the audio signal of the layer’s sample with one of several wave-
forms, resulting in strange new timbres and harmonics. There are two versions, one with the
waveform frequency modulated by an LFO, and another in which the waveform is modulated by
an envelope follower.
• RING-MOD-LFO
Freq (semitones)
The frequency of the wave, in semitones.
Mix (dry to wet)
This control allows you to control the blend between totally dry (0) and totally wet (100) signals.
Mode (Sin/Tri/Saw/Sqr/Prb/White/Pink)
The shape of the oscillator with which the audio signal is multiplied. Sine, Triangle, Saw, Square,
Parabolic, White Noise and Pink Noise are available.
Rate (units depend on Sync parameter)
The rate of the LFO modulating the filter cutoff. The units of this control depend on the setting
of the Sync parameter. If Sync is set to seconds, the rate is adjustable from 0.03Hz to 128Hz. If
Sync is set to BPM, the rate is adjustable from 16 notes to a 256
th note, with normal, triplet and
dotted note settings available.
Sync (seconds or BPM)
Sets the time base to either Seconds or BPM sync values (following the GURU tempo).
Shape
The LFO shape, switchable between Sine, Cosine, Tri-Sine, Tri-Cosine, Arc-Sine, Arc-Cosine,
Saw-Up, Saw-Down, Square, Sample & Hold Pink, Sample & Hold Brown, Ramp-White, Ramp-
Pink and Ramp-Brown LFO shapes.
Depth (0 to 100%)
The amount of modulation applied to the cutoff frequency by the LFO.