FXpansion GURU - Manual (Page 70)

69
OFF by default
OFF by default
9:4 Misc
• Velocity-sensitive on-screen Pads (centre =
max. velocity)
Switching on this option results in the on-screen Pads sending
the highest velocity (127) when clicked at the centre. Lower
velocities are transmitted when Pads are clicked towards the
edge. This can be especially useful when editing velocity lay-
ers without a velocity-sensitive MIDI controller present.
• Always show info in Sequencer Master display
By default, the Sequencer Master display is permanently ac-
tive. If this option is enabled, everything but the current Engine
display and the Mute/Solo buttons is hidden until the mouse is
moved over the display.
• Solo track also solos Engine
By default, soloing a Pad in an Engine will result in any other
active Engines continuing to play as normal. With this option
enabled, clicking solo for any Pad/Pad lane in a Pattern also
solos its Engine.
• Exclusive solo for Engines in Mix view
With this option enabled, only one channel can be soloed in
the Mix view: if a channel is already soloed, clicking solo on
another channel results in the previously soloed channel being
taken out of solo mode.
• Lock mouse to fader position in Mix view (less
precision)
GURU has the capability of much higher control resolution on
faders than is usual, when clicking and dragging. However,
the mouse does not lock to the caps of faders, which can be
a bit disorienting at first, and is made worse with low quality
pointing devices. Therefore this option is enabled by default.
Disable this option if you would like higher control resolution
when clicking and dragging faders in GURU.
• Click on GURU logo for Panic function (MIDI
reset)
Enabling this option turns the GURU logo on the interface into
a panic button, sending a MIDI reset when clicked.
• Swap [ALT] and [SHIFT] keys
This swaps the effect of pressing the [ALT] and [SHIFT] keys
within GURU.
ON by default
OFF by default
OFF by default
ON by default
OFF by default