FXpansion GURU - Manual (Page 67)

66
This option will not apply when both the ‘Pads respond to MIDI
velocity’ and ‘Pads respond to MIDI velocity in Record mode’
option is turned off.
When you are in record-armed and record modes, the Pattern
keys will light up, and you’ll be able to hear the velocity-scaled
Pad over their range when they are clicked/played.
• Pads respond to velocity in Record mode
This allows you to set Pads to be velocity-responsive during
record mode, even if the ‘Pads respond to MIDI velocity’ option
is disabled.
• Alternative click sound in Record mode
If you find the default GURU click sound (during record mode)
not to your liking, you can enable this option to provide a differ-
ent, softer-sounding click.
• Send click audio signal to sub-output 7
If you enable this option, the Record mode click signal (if ena-
bled on the Sequencer Master display during Record-armed
mode) is routed to sub-output 7. This can be useful for certain
monitoring situations.
• Use MIDI notes for Commit and Undo in
Record mode
Assigns the Commit and Undo buttons to MIDI notes G#2 and
A#2 respecitvely, during record mode. This is very useful for
recording without leaving your keyboard.
9:2 Audio Options
• Show averaged L/R sample in Pad Edit wave-
form display
By default, GURU shows an average of the left and right chan-
nels when viewing a stereo sample in the waveform display.
You can disable this option in order to see the left channel only
when you use stereo files.
• Show/snap to zero crossings in Pad Edit wave-
form display
By default GURU shows zero crossings as white vertical lines
when zoomed in in the Pad Edit view, and the start/end mark-
ers snap to them. Turning off this option disables this function-
ality.
ON by default
OFF by default
OFF by default
OFF by default
ON by default
ON by default