FXpansion GURU - Manual (Page 77)

76
Equalizers
These are 1-band parametric EQ units.
• HIGH-PASS: 20 Hz to 6.4 kHz
Freq (20 Hz to 6.4 kHz)
Q [Resonance] (0 to 100)
All frequencies below the Freq value are filtered. The amount of resonance at the cutoff-point is
adjustable from 0 to 100.
• LOW-SHELF: 33 Hz to 460 Hz, +-15dB
Freq (33 Hz to 460 kHz)
Gain (-15dB to +15dB)
All frequencies below the Freq value are boosted or attenuated according to the Gain value.
• LOW-MID: Q 1.0, 40 Hz to 6.4 kHz, +-12dB
Freq (40 Hz to 6.4 kHz)
Gain (-15dB to +15dB)
The frequencies around the Freq value are boosted or attenuated, according to the Gain param-
eter. There is a resonance (Q) setting of 1 dB per octave.
• HIGH-MID: Q 1.0, 120 Hz to 18 kHz, +-12dB
Freq (120 Hz to 18 kHz)
Gain (-15dB to +15dB)
The frequencies around the Freq value are boosted or attenuated, according to the Gain param-
eter. There is a resonance (Q) setting of 1 dB per octave.
• HIGH-SHELF: 3.3 kHz to 18 kHz, +-15dB
Freq (20 Hz to 6.4 kHz)
Gain (-15dB to +15dB)
All frequencies above the Freq value are boosted or attenuated according to the Gain value.
• LOW-PASS: 100 Hz to 18kHz
• Freq (100 Hz to 18 kHz)
• Q [Resonance] (0 to 100)
All frequencies above the Freq value are filtered. The amount of resonance at the cutoff-point is
adjustable from 0 to 100.