FXpansion GURU - Manual (Page 93)

92
11:3 MIDI Keyboard layout
11:4 Host Automation Parameters
GURU exposes most parameters to your host sequencer’s automation system. Please consult
your host/sequencer manual for details on how to use its automation facilities.
Engine Parameters:
These parameters exist for all Engines (there are 8 parameters for each, prefixed by Eng.1,
Eng.2 etc.):
• Engine BPM Denominator
• Engine BPM Numerator
These parameters represent the Engine tempo multiplier ratio. Although Engine 1’s tempo ratio is
not seen on the GURU interface, it can be controlled from your sequencer.
• Engine Groove Time (Groove timing amount)
• Engine Groove Vel (Groove velocity amount)
The Groove parameters correspond to the Groove controls in the Sequencer Master display.
• Engine Master Level (Engine volume)
• Engine Master Pan
• Engine Master Tune
The rest of the Engine parameters mirror the controls on the Engine channels in the GURU Mix
view. Please refer to section 8:3 for more details on these.
Commit (G#2)
[only during Record mode]
MIDI Pads (C1-D#2) Pattern keys (C3-B4)
Undo (A#2)
[only during Record mode]